Sending A Fax; How To Fax; Entering Fax Mode; Sending A Fax From The Adf - Brother MFC-9450CDN User Manual

5

Sending a fax

How to fax

Entering fax mode

To enter fax mode press
key will glow blue.

Sending a fax from the ADF

Using the ADF to send your faxes is the
easiest way.
a
Make sure you are in Fax mode
b
Put your document face up in the ADF.
c
Dial the fax number. (See How to
dial on page 51.)
d
Press Mono Start or Colour Start.
If you press Mono Start, the
machine scans the pages into
memory and then sends the
document.
If you press Colour Start, the
machine starts dialling and sends the
document in real time.
Note
• To cancel a fax in progress press
Stop/Exit.
• If the Out of Memory message appears
while scanning a B&W document into
memory, press Stop/Exit to cancel or
Mono Start to send the scanned pages.
30
Sending a fax from the
5
scanner glass
You can use the scanner glass to fax the
5
pages of a book, or a single page at a time.
(Fax), and the
The documents can be up to Letter or A4
size. You can only send single page colour
faxes from the scanner glass.
5 a
b
.
c
d
e
f
g
Make sure you are in Fax mode
Put your document face down on the
scanner glass.
Dial the fax number. (See How to
dial on page 51.)
Press Mono Start or Colour Start.
If you press Mono Start, the
machine starts scanning the first
page. Go to e.
If you press Colour Start, the
machine starts sending. Go to g.
After the machine scans the page, the
LCD will prompt you to choose one of
the options below:
Next Page?
1.Yes 2.No(Send)
Press 1 to send another page.
Go to f.
Press 2 or Mono Start to send the
document. Go to g.
Place the next page on the scanner
glass, press OK. Repeat e and f for
each additional page.
Set Next Page
Then Press OK
Your machine will automatically send
the fax.
5
5
.