If You Cannot See The Roll Paper Jam - Ricoh 7700W Operating Instructions Manual

Table of Contents

Advertisement

Troubleshooting
Make sure that the paper is not loose. Insert it straight into the roller.
Watch carefully to make sure that the flap of the paper is inserted between
the feeder and the roller.
G
Close the Roll Feeder.

If You Cannot See the Roll Paper Jam

If roll paper jams inside the roll feeder, you still might need to check everywhere
to remove the entire length of paper.
R CAUTION:
• The fusing unit can be very hot. Do not touch any parts under the
• Be careful when replacing the roll paper or removing misfed pa-
5
• Do not touch the anti-humidity switch from inside the machine be-
A
Open the Roll Feeder.
B
Rotate the paper roll in the direction of the arrow until you can see the edge
of the paper.
C
Cut the edge of the paper with the cutter or scissors.
68
fusing cover. If necessary, wait until the fusing unit has cooled
down.
per by following the operating instructions properly. Otherwise,
an injury may result from the paper cutter inside.
cause it could be very hot.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ao40Ao417800w

Table of Contents