Troubleshooting; If Something Goes Wrong; If Indicator Lights Up - Ricoh 7700W Operating Instructions Manual

If Something Goes Wrong

If you have problems with your copier, consult the following pages. If a service
indicator lights up, read the following section. If the original or copy is stuck in
the copier; P.63; if the copier won't start, or if copies don't look right,

If Indicator Lights Up

If one of the indicators shown appears on the operation panel, turn to the appro-
priate page and follow the instructions described there.
What ap- What it
pears means
x
The origi-
nal or copy
paper is
jammed
some-
where.
L
The copier
needs a
technician.
M
A cover
,unit, or the
fusing unit
cover was
left open.
C
The paper
roll is fin-
ished.
D
The toner
cartridge is
empty, or
almost
empty.
c Wait until
the ready
indicator
lights.

5. Troubleshooting

What to do
See the fol-
lowing sec-
tion.
Call your
service rep-
resentative.
Close it.
Press firm-
ly.
Put in a
new roll of
paper.
P.56.
Replace the
toner car-
tridge.
P.50.
Wait. If it
stays on for
an unusu-
ally long
time, call
your serv-
ice repre-
sentative.
P.71.
61