Table of Contents
Advertisement
TOC
Section 2: Hardware and Software
Setup
This section will describe the step-by-step process of setting up
your Publisher. This includes information on how to load the
supplies (ink and disc media) necessary to start producing
discs.
A. INSTALLING THE PC SOFTWARE
The Installer Disc has a QuickStart menu that will guide you
through the process of setting up your duplicator. Please refer
to the following for more information on each step:
1. Place the Optical Disc Publisher Installer CD in your
CDRom Drive. The Installer application should automati-
cally launch in a few moments. If it does, proceed to Step 2.
If it does not automatically launch, follow these steps:
•
•
2. In the Installer Application, click the Standard Install
button. The on screen instructions will guide you step-by-
step through the installation process.
B. INSTALLING THE MAC SOFTWARE
The Installer Disc will guide you through the process of
setting up your Publisher. Please refer to the following for
more information on each step. Install the software as follows:
a. Insert the Installation CD-ROM in your system's CD-ROM
drive.
b. Double-click the CD-ROM icon.
c.
Double-click on the Disc Publisher XRP Installer.mpkg
file icon. Follow the on-screen instructions.
You have successfully installed all the necessary software!
Section C below will describe how to connect the Publisher to
your Mac.
Hardware and Software Setup
8
Setup
Double-click the My Computer Icon, then double-click
the icon of the appropriate CD drive containing the
Software Installer disc.
Double-click Setup.exe
INDEX
Advertisement
Table of Contents
