Section 4: Interpreting The Publisher's Indicator Lights - Primera Bravo XRP Disk publisher User Manual

TOC
Section 4: Interpreting the Publisher's
The Power and Busy LED indicator lights located inside the
front cover of the Publisher can tell you a lot about what is
happening inside the Publisher. Please refer to the following:
Ink Cartridge
LED
off
on solid
both lights are slowly blinking
alternately with one another
both lights are rapidly blinking
alternately with one another
flashing rapidly on solid
flashing slowly on solid
repeating pattern of both lights
flashing in unison, then one light
momentarily on solid.
Indicator Lights
Power
LED
on solid
on solid
Interpreting the Publisher's Indicator Lights
Publisher
Cover is open.
Is ready to receive job
Waiting for a cartridge to be
installed and the lid to be
closed (See Section 2-A)
The Publisher is initializing.
You will see this pattern when
the Publisher is first turned on.
Wait until the lights stop
blinking before opening
software or starting jobs.
The printer tray or ink
cartridge carrier has stalled.
Press the Ink button to retry
the operation.
The Publisher requires
additional media or multiple
discs have been picked. Add
media or clear the error. Press
the ink button to continue.
This indicates low ink warning.
If the left light stays solid after
the flash, the Color cartridge is
low. If the right light stays on
after the flash, the
BlackMonochrome cartridge
should be replaced.
INDEX
49