Setup The Optional Kiosk Bin - Primera Bravo 4102 XRP User Manual

TOC
5. Place the new cartridge into its corresponding colored slot.
Press down near the back of the cartridge until it clicks into
position.
Important Note: Make sure the cartridge is securely in place. An
improperly positioned cartridge will cause no ink of that color
to be printed.
H.

SETUP THE OPTIONAL KIOSK BIN

Kiosk Mode allows you to use both of the Publisher's Bins as
input, doubling your disc capacity from 50 discs to 100 discs.
In this mode, the finished discs will be deposited through the
front "reject
would be ejected in this manner. Rejects can be identified in the
stack because they will not be printed. Refer to the following
Kiosk Kit installation instructions. The kiosk bin is sold
separately. (Part No. 63789)
To enable Kiosk Mode, OpenPTPublisher - select Options from
the Tools menu - find the Options tab - now check the Kiosk
Mode box. On a Mac, Kiosk Mode can be enabled in the
Options
10 Getting Started
Click!
area" of the Publisher. In Kiosk mode all discs
menu.
INDEX
Robot