Table of Contents
Advertisement
TOC
B. CHOOSING A GOOD LOCATION
•
Place the Publisher in a location with adequate air
circulation to prevent internal heat build up. You will
need at least 10.8" (27.4 cm) or 6U to mount the Disc
Publisher in a rack.
•
Do not place the Publisher near heat sources such as
radiators or air ducts, or in a place subject to direct
sunlight, excessive dust, mechanical vibration or shock.
C. UNPACKING AND INSPECTION
While unpacking your Publisher, inspect the carton to ensure
that no damage has occurred during shipping. Make sure that
all supplied accessories are included with your unit.
The following items should be included:
•
Optical Disc Publisher
•
Gray Plastic Input and Output Bins
Power Cord
•
One Three-Color (CMY) Ink Cartridge
•
•
One Monochrome Black Ink Cartridge
•
QuickStart Installer Disc
•
USB 2.0 Interface Cable (Beige)
•
Warranty Card
This Operator's Manual, Quick Start Guide and Other
•
Printed Information
Save the carton and packing materials. They will come in
handy later if you ever need to transport the Publisher and/or
any of its parts and accessories.
2 Getting Started
INDEX
Advertisement
Table of Contents
