TOC
•
With the Publisher turned on, press the
Cartridge Button
•
While holding the Cartridge Button, press the Power
Button
•
Release both buttons
To stop the test, wait until the disc has moved to the
•
Output Bin and press the Power Button.
C. CALIBRATION UTILITY / ROBOTICS TESTING (PC)
The calibration utility allows you to change factory calibrated
robotic settings and perform robotics tests. Improper use of
this utility could result in a non-functioning unit. Please read
all instructions carefully or contact tech support for assistance.
Instructions for each of the functions are available by hovering
your mouse over the buttons and reading the tool tips that
appear.
To open the utility follow these instructions.
1. Open PTPublisher.
2. Click on "More Info" under the
following screen will appear.
until the robotics start to move.
Maintenance and Troubleshooting
INDEX
Robot Status
Panel. The
51