Table of Contents
Advertisement
TOC
C. HARDWARE SETUP
Step 1: Applying Power
•
Locate the power cord supplied with your Publisher.
•
Plug the adapter into a surge protected outlet, and plug the
power plug into the power port on the rear panel of the
Publisher.
Step 2: Loading Media (Discs)
NOTE: Your Publisher can print directly onto virtually any brand of inkjet
printable-surface CD/DVD media. However, different brands of discs
have different printable coatings. Because of this, you may need to
adjust the printer driver settings to accommodate your specific
brand of CD/DVD media. Refer to Section 3E and 3F for further
printer driver information.
Due to the wide variety of printable-surface CD/DVD media,
you may find that certain brands of discs provide higher print
quality than others. For maximum print quality, use CD/DVD
media authorized by Primera.
Hardware and Software Setup
INDEX
9
Advertisement
Table of Contents
