Section 2: Hardware And Software Setup; Installing The Pc Software; Installing The Mac Software - Primera Bravo se Disc Publisher User Manual

TOC
Section 2: Hardware and Software
Setup
This section will describe the step-by-step process of setting up
your Publisher. This includes information on how to load the
supplies (ink and disc media) necessary to start producing
discs.
A. INSTALLING THE PC SOFTWARE
The Installer Disc has a menu that will guide you through
the process of setting up your Publisher. Please refer to the
following for more information on each step:
1. Place the Optical Disc Publisher Installer CD in your
CDRom Drive. The Installer application should automati-
cally launch in a few moments. If it does, proceed to Step 2.
If it does not automatically launch, follow these steps:
•
•
2. Follow the on screen instructions. They will guide you
step-by-step through the installation process.
B. INSTALLING THE MAC SOFTWARE
The Installer Disc will guide you through the process of setting
up your Publisher. Please refer to the following for more
information on each step: Install the software as follows:
a. Insert the Installation CD-ROM in your system's CD-ROM
drive.
b. Double-click the CD-ROM icon.
c. Double-click on the Disc Publisher SE Installer.pkg file
icon. Follow the on-screen instructions.
Setup
Double-click the My Computer Icon, then double-click
the icon of the appropriate CD drive containing the
Software Installer disc.
Double-click Setup.exe
Hardware and Software Setup
INDEX
7