Table of Contents
Advertisement
TOC
Paper Size
The paper size option will be set to CD for printing onto
printable surface CDs and DVDs. The remaining options
apply if you have purchased the business card adapter kit.
Non-printable
Outer Margin
Adjust this value to print all the way to the outer edge of a CD.
This is useful if you are printing full coverage images. The
lower you set this value the farther to the outer edge of the CD
you will print. Please note that with most media the printable
surface does not extend all the way to the edge of the disc.
Because of this you will not normally set this value to zero. You
may also want to adjust the inner diameter setting found under
the Calibration Options which is explained later in this section.
Print Quality
This setting affects the quality, speed and ink usage of the
print. Color matching is also tied to this setting. Start with the
default setting for fastest printing and the least amount of ink
consumption. If the quality needs improvement move to the
next highest setting.
Disc Surface Quality
This setting affects the quality, speed and ink usage of the
print. Color matching is also tied to this setting. Start with the
default setting for fastest printing and the least amount of ink
consumption. If the quality needs improvement move to the
next highest setting.
Ink Cartridge
Color + Black is best for images that have large areas of black
graphics or text. Although you can print these same images
with just the color cartridge, often the blacks will look darker
with this setting.
Color Only is default setting and is best for most images. With
this setting the printer only uses the color cartridge to produce
all colors including gray scale black and white images.
INDEX
Creating Discs
37
Advertisement
Table of Contents
