Table of Contents
Advertisement
TOC
Intensity
The Intensity setting will control the amount of ink
saturation on the disc. When printing onto the Primera
TuffCoat discs, 96% is usually sufficient. When printing
on to other brands of media, or if you would like to print dark-
er colors, you may wish to increase the Intensity
setting.
Inner Diameter
The inner diameter refers to the size of the non-printed
center on your disc. The size of the center hub can vary from
one type of media to the next. This allows you to set the inner
diameter in millimeters allowing you to print all the way to the
center hub regardless of the type of disc you are using. For the
discs that Primera sells, use the following guide for Inner
Diameter:
Outer Margin
The Outer Margin refers to where the printing will cut
off around the outer edge of your disc. The size of the printable
surface can vary from one type of media to the next. This
allows you to set the outer margin in millimeters
allowing you to print all the way to the edge regardless of the
type of disc you are using. The outer margin for Primera's
TuffCoat Media should be set to 0.7mm.
Save As Default
The Save As Default button will save the current settings as the
system-wide defaults.
Restore Defaults
The Restore Defaults button will restore the driver settings to
the factory defaults.
Config Utility
This button launches the Configuration Utility. This Utility is
also available browsing to Hard Drive - Library - Printers -
Primera - DiscPublisherXRP - DiscPublisherXRPconfig.
This utility is used to report ink levels, clean and change ink
cartridges, and align your color and black cartridges for
Creating Discs
44
− 23 mm for Primera's Tuff-Coat media
− 24.9 mm for the Hockey Rink Disc, Business
Card Disc and 80mm CD
INDEX
Advertisement
Table of Contents
