Recorder Connections; Connecting A Tv Antenna; Easy Connections - Pioneer S-LX70C Operating Instructions Manual

Recorder connections

02
Chapter 2
Recorder connections

Connecting a TV antenna

This recorder has separate built-in TV tuners for
terrestrial digital and terrestrial analog TV broadcasts.
If you are ready to receive digital broadcasts now, use one
of the supplied RF antenna cables connect an antenna
(either an antenna wall outlet or indoor antenna) to the
ANTENNA (DIGITAL) IN connector. Next, connect the
other supplied RF antenna cable to connect an antenna
to the ANTENNA IN (RF IN) connector. Lastly, connect
the recorder to your TV from the ANTENNA OUT
connector.
Antenna wall outlet
ANTENNA
IN (RF IN)
ANTENNA
IN
AV 2 (INPUT 1/DECODER)
OUT
AV 1 (RGB) – TV
ANTENNA
OUT
To antenna input
Important
• If there is only one antenna outlet on your wall, use a
divider.
• Do not connect a component that can receive analog
signals to the ANTENNA (DIGITAL) OUT.
If your area is not yet served with terrestrial digital services,
connect your antenna's output to the ANTENNA IN (RF
IN) connector using one of the supplied RF antenna
cables. Next, connect the recorder to your TV from the
ANTENNA OUT connector.
62
En
Antenna wall outlet
or indoor antenna
ANTENNA
(DIGITAL) IN
DIGITAL
AUDIO OUT
HDMI OUT COAXIAL
ANTENNA(DIGITAL)
G-LINK CONTROL
OUT IN
IN
5 V 30 mA
TV
ANTENNA
IN (RF IN)
ANTENNA
IN
AV 2 (INPUT 1/DECODER)
OUT
AV 1 (RGB) – TV
ANTENNA
OUT
To antenna input
We strongly recommend using an outdoor antenna for
better broadcast picture quality.
If, however, you want to use an indoor antenna, use one
with a signal amplifier rated at 5 V, 30 mA and set Aerial
Power to On in the Initial Setup menu (see page 153).
AC IN

Easy connections

• While we recommend using an HDMI connection
(see page 13), you can also connect easily by using a
SCART cable.
The setup described below is a basic setup that allows
you to watch and record TV programmes, and play discs.
Other types of connections are explained starting on the
following page.
Important
• The AV1 (RGB)-TV AV connector can output ordinary
(composite), S-Video or RGB video, plus stereo
analog audio. The AV2 (INPUT 1/DECODER)
connector accepts ordinary, S-Video and RGB video
input, as well as stereo analog audio. See AV1 Out
and AV2/L1 In on page 155 for how to setup these
options.
• Before making or changing any rear panel
connections, make sure that all components are
switched off and unplugged from the wall outlet.
Antenna
wall outlet
DIGITAL
AUDIO OUT
HDMI OUT COAXIAL
ANTENNA(DIGITAL)
G-LINK CONTROL
OUT IN
IN
5 V 30 mA
TV
AC IN