Wall Mounting The Front Speakers; Before Mounting - Pioneer HTP-700 Operating Instructions Manual

01 Speaker Setup (HTP-FS500)
6 Secure the speaker and the pole with 2
screws.
• Confirm that the speaker cable does not
become pinched between the pole and the
speaker.
•
Put the speaker cable in the back of the base
the stand.
of
24
En
Wall mounting the front
speakers
The front speakers have a mounting hole which
can be used to mount the speaker on the wall.

Before mounting

• Remember that the speaker system is
heavy and that its weight could cause the
screws to work loose, or the wall material to
fail to support it, resulting in the speaker
falling. Make sure that the wall you intend
to mount the speakers on is strong enough
to support them. Do not mount on plywood
or soft surface walls.
• Mounting screws are not supplied. Use
screws suitable for the wall material and
support the weight of the speaker.
Caution
• If you are unsure of the qualities and
strength of the wall, consult a professional
for advice.
• Pioneer is not responsible for any
accidents or damage that result from
improper installation.
Mounting screw
(not supplied)
5 mm to 7 mm
5 mm
10 mm