Emerson 375 User Manual page 75

Fieldbus Functionality
Parameter Functionality
Shaded areas indicate values that cannot be changed.
In initial versions of the Fieldbus application, you are
able to edit only the resource, transducer, and I/O
blocks. You will be able to open and view all other
blocks, however, you will not be able to edit them.
Modified Parameters
An asterisk (*) will appear next to a modified parameter
which has not yet been sent to the device.
Display Block Parameters for Fieldbus Devices
To display the parameters for fieldbus devices:
1. Display the Live Device List; see page 4-9.
2. Double-tap a device on the Live Device List to view
the blocks in that device.
3. Double-tap the desired block.
4. Double-tap the desired parameter group. The
parameters and their current values are displayed.
Shaded areas indicate values that cannot be edited.
Change and Send Parameter Data
To change the values for parameters:
1. Display the parameters for the fieldbus device.
2. Double-tap the desired parameter.
3. Change the value for the parameter.
(Tap HELP to view a description of the parameter.)
4. Tap OK to acknowledge the parameter change.
Repeat these steps for other parameters as
necessary. A "*" symbol indicates a parameter has
been edited.
5. Tap SEND to commit your changes to the connected
fieldbus device.
4-15