Learning The Basics; Overview; Safety Messages - Emerson 375 User Manual

Field communicator
Hide thumbs Also See for 375:
Table of Contents

Advertisement

U
'
M
SER
S
ANUAL
March 2007
S
2
ECTION

OVERVIEW

SAFETY
MESSAGES
Ensure the battery pack and the 375 Field Communicator are properly aligned during assembly
to prevent damage to the connector pins.
Do not pull up on the battery pack as this could damage the power supply connector. The
System Card must be inserted or removed by applying gentle pressure in line with the axis of the
card and the socket. Do not pull upwards or press downwards on the card as this could damage
the card or the unit and void the warranty.
A Re-Flash operation initiates the reinstallation of the firmware and software from the System
Card. This should only be performed under the direction of technical support personnel.
www.fieldcommunicator.com
L
EARNING THE
This section provides instructions on basic features and
functions of the 375 Field Communicator. It also provides
information on starting, entering stand by, shutting down,
configuring, using the ScratchPad application, and
maintaining the 375 Field Communicator. The
functionality described in this section is based on system
software version 2.0.
Procedures and instructions in this section may require
special precautions to ensure the safety of the personnel
performing the operation. Information that raises
potential safety issues is indicated by a warning symbol
(
). Refer to the following safety messages before
performing an operation preceded by this symbol. See
the Troubleshooting section for more warning messages.
IMPORTANT NOTICE
IMPORTANT NOTICE
WARNING
375 F
C
IELD
B
ASICS
OMMUNICATOR

Advertisement

Table of Contents
loading

Table of Contents