Emerson 375 User Manual page 28

2-18
Listen For PC
In Listen For PC, the 375 Field Communicator is under
the control of a PC application for transferring data and
managing device configurations. The PC application
could be one of the following:
• AMS™ Suite: Intelligent Device Manager (version 6.2
or higher), software for managing instrumentation and
valves in a process plant. Currently, AMS Device
Manager supports HART configurations only.
• 375 Easy Upgrade Programming Utility
NOTE
The on/off/stand by key, and the stand by and auto-off
timers are disabled when the 375 Field Communicator is
in Listen For PC mode.
The 375 Field Communicator must be in Listen For PC
mode when communicating through IrDA.
To enter Listen For PC:
1. From the 375 Main Menu, select Listen For PC. A
warning message will appear if the 375 Field
Communicator is running on battery power when you
select Listen For PC. Click OK to proceed and enter
Listen for PC mode. The Listen For PC screen
displays the unit name and System Card Serial
Number.
2. Align the 375 Field Communicator IrDA interface with
the PC IrDA interface.
3. Complete the necessary transfer(s) using the Easy
Upgrade Programming Utility or AMS Device
Manager. See the Easy Upgrade Programming Utility
online Help for more information.
4. Tap EXIT to close the Listen For PC application.
If new system software was downloaded to the 375 Field
Communicator System Card, an update of the Internal
Flash will occur upon exit.
Learning the Basics