Saving An Online Configuration; Displaying The Device Setup Submenu - Emerson 375 User Manual

3-12
Saving an
Online
Configuration
Displaying the
Device Setup
submenu
When a configuration is saved from a connected device,
the configuration will be saved as a device configuration.
To save the configuration in the connected device:
1. Connect the 375 Field Communicator to a HART loop
or directly to the device and turn on the 375 Field
Communicator.
2. Double-tap HART Application from the 375 Main
Menu. The HART Online menu appears.
3. Tap the Save button.
a.To set the location where the configuration will be
saved, double-tap Location, select Internal Flash or
Configuration EM (expansion module), and tap
ENTER.
b.To specify a name for the configuration, double-tap
Name, enter the name, and tap ENTER.
c. To specify the configuration type, double-tap Config
Type, select Device, and tap ENTER.
4. Tap Save. If the configuration already exists, a
message will be displayed. Tap YES to overwrite the
older version with the new version, or tap NO to return
to the Save as screen.
The Device Setup menu accesses every configurable
parameter of the connected device.
The Online menu displays critical process information
that is continuously updated. If the primary variable and
related engineering units are too long, they will not
appear on the Online menu. Double-tap to view the item
and the related engineering units when it appears
truncated on the Online menu.
Double-tap Device setup to view the process variables,
diagnostics and service, basic setup, detailed setup, and
review menus.
Process Variables (PV)
The PV menu lists all process variables and their values.
Process variables are continuously updated when this
screen is displayed.
HART Functionality