Installing The Balance - A&D FZ-1200CT Instruction Manual

2-2 Installing the Balance

Install the balance as follows:
1. Place the balance on a solid weighing table. Refer to "3. PRECAUTIONS" for installing the balance.
2. Assemble the breeze ring, pan support, weighing pan and large breeze break on the balance as
shown in the illustration on page 5.
3. Adjust the leveling feet to level the balance. Confirm it using the bubble spirit level.
4. Confirm that the AC adapter type is correct for the local voltage and power receptacle type.
5. Connect the AC adapter to the balance. Warm up the balance for at least one hour with
nothing on the weighing pan.
Note
The AC adapter plug is protected against dust and may be difficult to insert. When inserting
the plug, turn the plug while pushing on it.
6