Installing The Balance - A&D GX-300 Instruction Manual

GX-2000/3000/4000/6100/6000/8000
Breeze ring
Display
Bubble spirit
level
Reference card
Windows communication
tools (WinCT)
Note
AC adapter
Please confirm that the AC adapter type is correct
for your local voltage and receptacle type.

2-2 Installing the Balance

Install the balance as follows:
1. Refer to "3. PRECAUTIONS" for installing the balance. Place the balance on a solid weighing
table.
2. GX-200/300/400/600/800/1000
Assemble the breeze break on the balance as shown in the illustration above.
GX-2000/3000/4000/6100/6000/8000
Assemble the breeze ring and weighing pan on the balance as shown in the illustration above.
3. Adjust the leveling feet to level the balance. Confirm it using the bubble spirit level.
4. Confirm that the adapter type is correct for the local voltage and power receptacle type.
5. Connect the AC adapter to the balance. Warm up the balance for at least 30 minutes with
nothing on the weighing pan.
Weighing pan
Keys
Leveling foot
AC adapter
ID label
Grounding
terminal
AC adapter jack
AC adapter plug
Main unit cover
7
Main unit
Pan support
receptor
Main unit rear side
RS-232C
serial interface
(External input terminal)