A&D FZ-1200CT Instruction Manual page 54

Title block and end block
When a weight value is recorded as the GLP data, "Title block" and "End block" are inserted at the
beginning and at the end of a group of weight values, in the GLP report.
Note
To output the report to an AD-8121B printer , use MODE 3 of the AD-8121B printer.
Operation
1 With the weight data displayed, press and hold the PRINT key until S5tart
The "Title block" is output.
2 The weight data is output according to the parameter setting of the data output mode.
3 Press and hold the PRINT key until recend
When the setting is "info 1":
is displayed. The "End block" is output.
When the setting is "info 2":
With FZ-CT series, the time and
date are added to output data.
52
is displayed.