Installing The Balance And Precautions; Installing The Balance - A&D BM-20 Manual

3. Installing The Balance And Precautions

Installing The Balance

3.1.
Step 1 Refer to "3.2. Precautions Before Use (Environmental Condition And Preparations)"
concerning the place to install the balance. Place the balance on a firm weighing table.
Step 2 Assemble the weighing pan and other parts in the weighing chamber, in accordance with the
product type and use.
BM-500, BM-300, BM-200
Weighing pan
Pan support
Breeze break ring
Dust plate
BM-22, BM-20
Test tube holder
Large weighing pan for filter
Small weighing pan for filter
Weighing pan
Pan support
Small fine range ring
Fine range ring
Dust plate
BM-252
Use the fine range ring to avoid errors caused by drafts
when weighing with a minimum display of 0.01 mg.
Choose the weighing pan to
adapt to the filter size.
8
Fine range ring
Use the holder for
micro tube or test
tube of φ12 mm
or less.
BM series