A&D BM-20 Manual page 21

Unit Setting Example
5.3.1.
The example below sets the units in the order with g (gram) as the first unit followed by PC
(counting mode).
1 Press and hold the
function table is displayed in the weighing mode, then release
the key.
2 Press the
RANGE
3 Press the
PRINT
4 Press the
RE-ZERO
The stabilization indicator
specified.
5 Press the
RANGE
6 Press the
RE-ZERO
The stabilization indicator
specified.
7 Press the
PRINT
The balance displays
menu item of the function table.
8 Press the
CAL
balance returns to the weighing mode with g, the unit
selected first.
9 Press the
MODE
BM series
key until
RANGE
key several times to display
key to enter the unit selection mode.
key to specify the unit of g.
appears when the unit is
key several times to display
key to specify the unit of pcs.
appears when the unit is
key to store the units.
and then displays the next
end
key to exit the function table. Then the
key to switch between g and PC.
of the
ba5fnc
.
Unit
.
Unit
19
Press and hold
Press several times
Specify gram
Press several times
Specify counting mode
Store them