Other Options - A&D BM-20 Manual

Other Options

Order code
Anti-vibration table
Approximately 24kg, Artificial stone (Terrazzo).
AD-1671 Use this table when unstable weighing is caused by vibration coming from the floor.
Use the AD-8922A remote controller to avoid a weighing error by a slight table tilt
that key operation may make.
Tabletop breeze break
Protects the balance from wind from sources such as air conditioning or people
AD-1672 passing by, thereby reducing balance weighing error.
The transparent panel assembly consists of antistatic plastic material that protects
the balance from static electricity.
Rechargeable Battery
AD-1682
This option allows use of the balance in a place where AC power is not available.
Electrostatic field meter
This option measures the amount of the static charge on the sample, tare or
AD-1684 peripheral equipment and displays the result.
If those are found to be charged, discharge them using the AD-1683 DC static
eliminator.
Weighing environment logger
A data logger equipped with 4 sensors for temperature, humidity, barometric
pressure and vibration that can measure and store environmental data. When
connected to the RS-232C interface of the balance, the AD-1687 can store
AD-1687
environmental data along with weighing data. Therefore, it is possible to store
data in an environment where a computer can not be used.
The stored data can be read to a personal computer using USB. As the AD-1687
is recognized as USB memory, special software is not required to read the data.
Data logger
AD-1688 When connected to the RS-232C interface of the balance, the AD-1688 can store
the data in an environment where a personal computer can not be used.
Tweezers for calibration weight
This option is the same as the tweezers provided as a standard accessory and is
AD-1689
used when calibrating the balance using an external weight.
Weighing environment analyzer
The analyzer can be used for diary check and analysis and proof of the cause of
AD-1691 a weighing error.
The analyzer can be used to deal with weighing errors. Quality control can be
managed easily by using as a standalone analyzer (without using a computer).
LAN Converter
This option can be used to connect the RS-232C interface of the balance to the
AD-8526
Ethernet (LAN) port of a computer. This allows management of the balance
weighing data with a computer connected to a network.
Remote Display
AD-8920A
This option can be connected to the balance using the RS-232C interface.
Remote Controller
This option can be connected to the balance using the RS-232C interface and
AD-8922A
can control the balance remotely.
Various options such as comparator output or analog output are available.
AX-MX-36 Tweezers for filter weighing
Name and description
2 pieces
88 BM series