Emerson 375 User Manual page 92

5-8
DD Error..."DD header file corrupted"...Reinstall
Device version <manufacture name, device name,
dev. rev. #, and
DD rev. #>; HART application <version x.y> ...See
Programming Interface for details.
Hart Application Error..."data compression dll is
missing"...Reinstall System Files...See User's
Manual for details.
Hart Application Error..."data compression dll is
corrupted"...Reinstall System Files...See User's
Manual for details.
Memory Error..."data compression memory
allocation error"...Restart Unit...See User's Manual
for further details.
DD Error..."failure while opening DD"...Reinstall
Device Type x Device Rev x dd Rev x...See
Programming Interface for details.
DD Error..."failure while uncompressing
DD"...Reinstall Device revision <manufacture
name, device name, dev. rev. #, and DD rev. #>
...See Programming Interface for details.
Communication Error..."unexpected return
value"...See User's Manual for solution.
DD Error..."DD file corrupted"...Reinstall Device
revision <manufacture name, device name, dev.
rev. #, and
DD rev. #>...See the Programming Interface for
details.
Forward Compatibility Blocked...DD Device Type x
Device Rev x dd Rev x cannot be used in forward
compatibility mode...x... Do you wish to proceed in
forward compatibility mode?
DD Not Installed...DD device type x device rev x is
not installed on the System Card...See
Programming Interface for details on DD
updates...Do you wish to proceed in forward
compatibility mode?
This error message appears when there is a
check sum error in the DD header file.
This error message appears when the data
compression component cannot be located.
This error message appears when required
functionality is missing from the data
compression component.
This error message appears when HART app
is unable to acquire enough memory for data
compression.
This error message appears when the
system cannot open the DD file.
This error message appears when an error is
detected while uncompressing the DD.
This error message appears when an
unexpected value is returned from a function
call.
This error message appears when the
checksum of the DD does not match with that
described in the DD header file. This error
may be corrected by connecting the 375
Field Communicator to the Easy Upgrade
Programming Utility and running a Refresh
operation.
This error message appears when the HART
app attempts to use a DD to run in forward
compatibility mode and finds that the DD is
prevented from running in forward
compatibility mode.
This error message appears when the DD for
the connected device is not in the unit.
Troubleshooting