Figure 19 Vlan: Static Vlan; Table 16 Vlan: Static Vlan - ZyXEL Communications P-871H Series User Manual

• sent to a VLAN group as normal depends on its VLAN tag.
• sent to a group whether it has a VLAN tag or not.
• blocked from a VLAN group regardless of its VLAN tag.
You can also tag all outgoing frames (that were previously untagged) from a port with the
specified VID.
To configure a static VLAN, click Static VLAN in the VLAN Status screen to display the
screen as shown next.

Figure 19 VLAN: Static VLAN

The following table describes the related labels in this screen.

Table 16 VLAN: Static VLAN

LABEL
Name
VLAN Group ID
Port
Control
Tagging
Add
Cancel
Clear
Chapter 6 VLAN
DESCRIPTION
Enter a descriptive name for the VLAN group for identification purposes.
Enter the VLAN ID for this static entry; the valid range is between 1 and 4094.
This field displays the Ethernet port number or the VDSL port (VDSL).
Select Normal for the port to dynamically join this VLAN group using GVRP. This is
the default selection.
Select Fixed for the port to be a permanent member of this VLAN group.
Select Forbidden if you want to prohibit the port from joining this VLAN group.
Select TX Tagging if you want the port to tag all outgoing frames transmitted with
this VLAN Group ID.
Click Add to add the settings as a new entry in the summary table below.
Click Cancel to reset the fields.
Click Clear to start configuring the screen again.
P-871H Series User's Guide
47