ZyXEL Communications P-871H Series User Manual page 63

P-871H Series User's Guide
Table 22 Command Summary (continued)
COMMAND
vlan
vlan1q
vdsl port
ptmf
62
DESCRIPTION
Clears port-based VLAN.
clear
<incoming
port>
<outgoing
port>
Sets port-based VLAN
set <incoming
port>
<outgoing
port>
Displays VLAN status.
status
type <802.1q | Sets VLAN mode.
port-based>
All "sys sw vlan1q" commands relate to IEEE 802.1Q Tagged
VLAN configuration. Use "config save" to save your
configuration changes.
Shows a port's VLAN information.
port status
<port>
Sets the default VLAN ID of a port.
port
defaultVID
<port><vid>
Sets the VLAN ID of the management VLAN (CPU).
svlan cpu
<vlan id>
Deletes the specified (VID) static VLAN.
svlan delentry
<vid>
Displays a table of static VLANs.
svlan list
Applies a static VLAN to a port.
svlan setentry
<vid> <port>
vlan list Shows the specified IEEE 802.1Q Tagged VLAN table.
<all|vid|start
_vid end_vid>
Displays general VLAN status.
status
Clears port counter.
clrcntr
counter Displays VDSL counter.
Displays SNR margin.
snr
Displays VDSL rate.
speed
Displays DSL state machine.
status
Displays PTMF configuration.
config
Displays PTMF counter.
counter
Clears PTMF counters.
clrcntr
Displays modem code version.
version
Chapter 10 Introduction to CLI