Sys Sw Vlan1Q Port Status; Sys Sw Vlan1Q Port Defaultvid; Figure 42 Sys Sw Vlan Type Command Example; Figure 43 Sys Sw Vlan1Q Port Status Command Example - ZyXEL Communications P-871H Series User Manual

Figure 42 sys sw vlan type Command Example

ras> sys sw vlan type port-based
ras> sys sw vlan status
VLAN type = Port-based
VLAN map:
Port 1: O X X X
Port 2: X O X X
Port 3: X X O X
Port 4: X X X O
CPU : - X X X
Where 'O' means the port itself, 'X' means its VLAN member, and '-' is not
VLAN member.
ras>

11.7.7 sys sw vlan1q port status

Syntax:
This command displays a port's VLAN settings. The following example displays the VLAN
settings on port 4.

Figure 43 sys sw vlan1q port status Command Example

ras> sys sw vlan1q port status 4
Port 4 VLAN Setup :
Default VLAN ID = 1
ras>

11.7.8 sys sw vlan1q port defaultVID

Syntax:
This command set the default port VLAN ID (between 1 and 4094).
The following example sets the default port VID to 2 on port four. Then displays the port
VLAN settings.

Figure 44 sys sw vlan1q prt defaultVID Command Example

ras> sys sw vlan1q port defaultVID 4 2
ras> sys sw vlan1q port status 4
Port 4 VLAN Setup :
Default VLAN ID = 2
ras>
Chapter 11 Command Examples
2 4
sys sw vlan1q port status <port>
sys sw vlan1q port defaultVID <port> <VID>
P-871H Series User's Guide
67