The Firmware Screen; Figure 75 Maintenance > Firmware - ZyXEL Communications P-660RU-T1 v3 User Manual

Chapter 22 Firmware
Table 44 General Commands for GUI-based FTP Clients
COMMAND
Transfer Type
Initial Remote Directory
Initial Local Directory

22.2 The Firmware Screen

Use this screen to manage configuration files and upload firmware to your ZyXEL Device.
Firmware Upgrade
Follow the instructions in this screen to upload firmware to your ZyXEL Device. The upload
process uses HTTP (Hypertext Transfer Protocol) and may take up to two minutes. After a
successful upload, the system will reboot. See
firmware using FTP/TFTP commands.
Do NOT turn off the ZyXEL Device while firmware upload is in progress!
Romfile Backup
Romfile backup allows you to back up (save) the ZyXEL Device's current configuration to a
file on your computer. Once your ZyXEL Device is configured and functioning properly, it is
highly recommended that you back up your configuration file before making configuration
changes. The backup configuration file will be useful in case you need to return to your
previous settings.
Click Maintenance > Firmware to open the following screen.
Figure 75 Maintenance > Firmware
154
DESCRIPTION
Transfer files in either ASCII (plain text format) or in binary mode.
Specify the default remote directory (path).
Specify the default local directory (path).
Section 22.1.3 on page 150 for upgrading
P-660RU-Tx v3 User's Guide