Internet Access - ZyXEL Communications P-660RU-T1 v3 User Manual

Advanced Suggestions
• Try to access the ZyXEL Device using another service, such as Telnet. If you can access
the ZyXEL Device, check the remote management settings and firewall rules to find out
why the ZyXEL Device does not respond to HTTP.
• If your computer is connected to the WAN port, use a computer that is connected to a
ETHERNET port.
I can see the Login screen, but I cannot log in to the ZyXEL Device.
1 Make sure you have entered the password correctly. The default password is 1234. The
field is case-sensitive, so make sure [Caps Lock] is not on.
2 You cannot log in to the web configurator while someone is using Telnet to access the
ZyXEL Device. Log out of the ZyXEL Device in the other session, or ask the person
who is logged in to log out.
3 Turn the ZyXEL Device off and on.
4 If this does not work, you have to reset the device to its factory defaults. See
on page
I cannot Telnet to the ZyXEL Device.
See the troubleshooting suggestions for
configurator.
I cannot use FTP to upload / download the configuration file. / I cannot use
FTP to upload new firmware.
See the troubleshooting suggestions for
configurator.

25.3 Internet Access

I cannot access the Internet.
1 Check the hardware connections, and make sure the LEDs are behaving as expected. See
the Quick Start Guide and
P-660RU-Tx v3 User's Guide
30.
Ignore the suggestions about your browser.
Ignore the suggestions about your browser.
Section 1.5 on page
I cannot see or access the Login screen in the web
I cannot see or access the Login screen in the web
29.
Chapter 25 Troubleshooting
Section 1.6
165