Table of Contents
Advertisement
QUICK INSTALLATION GUIDE
2. On "FTA Only" item, press [
] to select scanning of all
channels or just scanning of free channels. If you select "Yes" it
will scan free channels only.
3. On "Scan Channel" item, press [
] to select the
scanning range from TV + Radio Channels, only TV channels or
only Radio channels.
4. On "Scan Mode" item, you can select "Auto Scan" to make
a blind scan or "Preset Scan" to scan all preset transponders of
the selected satellites.
5. Select "Search" and press [OK] to start scanning. In the
lower part of the window the progress of scanning and the
found channels are displayed.
6. Press [Exit] to cancel or fi nish the scanning and saving the
found channels.
Main Menu: Selecting this option, the main menu will appear
on the TV.
STEP 3: TIME CONFIGURATION
It is recommended to setup the clock before starting to enjoy
the receiver, because correct time maybe is required by some
applications. Please complete following options:
Press the [Menu] key of the remote control for appearing the
main menu. Select the "System Setup" option and confi rm
pressing [OK].
Once in the "System Setup" option, please select "Time and
Timer setting" option and press [OK]. Select "Time" option and
press [OK]. Image 5 is watched on the TV. For setting up the
time, please complete:
1. GMT Usage: this option will allow you to select if the date
IMAGE 5
and time will be introduced manually (GMT Usage: Off) or if
you wish to introduce the offset respect GMT manually (GMT
Usage: On).
2. GMT Offset: If GMT Usage is On, the offset respect GMT
has to be confi gured depending on your region or country. Use
the [
] keys to choose the offset. Remember that the
offset values are between -12:00 and +12:00
3. Date / Time: In order to introduce manually the time and date.
Before these values can be modifi ed, the automatic control of
GMT has to be turned off.
NOTE: If the current channel provides the correct time
information, you will see the current time after you entered
"Time" menu. If the channel doesn't provide time information,
you have to input the date and time information manually. The
most channels support the time signal.
4. Press [Exit] to exit the menu.
PAG.
6
Advertisement
Table of Contents
