Univers by FTE U4109 User Manual page 3

FOLLOW NEXT STEPS FOR THE CORRECT INSTALLATION OF THIS RECEIVER.
STEP 1: CONNECTIONS
The coaxial cable, with satellite signal, must be connected to the "IF IN" connector. The "TV SCART"
connector must be connector to the TV set.
Depending on the type of installation, the receiver should be connected and confi gured following next
examples.
Example 1 – Basic System
Example 3 – Combined with terrestrial
IMAGE 1
QUICK INSTALLATION GUIDE
QUICK INSTALLATION GUIDE
STEP 2: BASIC CONFIGURATION OF THE
RECEIVER
The receiver includes an installation assistant (Quick Setup)
that will help you to setup the different parameters.
When the receiver is turned on at fi rst time (using the button at
the rear panel of the receiver), the next menu is shown on the
TV (Image 1):
PAG. 3
Example 2 – DISEqC switches
Example 4 – Motorized system