Univers by FTE U4132 User Manual
  1. Manuals
  2. Brands
  3. Univers by FTE Manuals
  4. Receiver
  5. U4132
  6. User manual

Univers by FTE U4132 User Manual

Digital satellite receiver
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
U4132

Advertisement

Table of Contents
loading

Related Manuals for Univers by FTE U4132

Summary of Contents for Univers by FTE U4132

  • Page 1 U4132...
  • Page 2 SAFETY PRECAUTION Warning: The lightning flash with The exclamation point arrowhead symbol, within To reduce the risk of electric shock, within equilateral don’t open the cabinet. Refer servicing an equilateral triangle, is triangle intended intended to alert the user to qualified personnel only. to alert the user to to “dangerous voltage”...
  • Page 3 QUICK INSTALLATION GUIDE QUICK INSTALLATION GUIDE Follow next steps for the correct installation of this receiver. STEP 1: CONNECTIONS The coaxial cable, with satellite signal, must be connected to the “IF IN” connector. The “TV SCART” connector must be connected to the TV set. The receiver also includes an UHF modulator, allowing connecting a TV set or VCR.
  • Page 4 QUICK INSTALLATION GUIDE STEP 2: BASIC CONFIGURATION OF THE RECEIVER The receiver includes an installation assistant (Quick Setup) that will help you to setup the different parameters. When the receiver is turned on at first time (using the button at the rear panel of the receiver), the next menu is shown on the TV (Image 1): The receiver is programmed with all the channels of Astra (at...
  • Page 5 QUICK INSTALLATION GUIDE manual of this system to get the correct information. Single search : You can edit the following items (Image 2): 1. Satellite: Press [ ] to switch Satellites or press [OK] to enter satellite list to select directly. 2.
  • Page 6 QUICK INSTALLATION GUIDE Multi search : You can edit the following items (Image 4): 1. On “Satellite” item press [OK] to open the satellite list. Then press [ ] to move the highlight and press [OK] to mark/ unmark and [EXIT] to finish the selection. You can select several satellites in this menu.
  • Page 7 QUICK INSTALLATION GUIDE date. Before these values can be modified, the automatic control of GMT has to be turned off. NOTE: If the current channel provides the correct time information, you will see the current time after you entered “Time” menu. If the channel doesn’t provide time information, you have to input the date and time information manually.
  • Page 8 QUICK INSTALLATION GUIDE TV Channel List: This option shows the list of TV stored channels. Radio Channel List: This option shows the list of Radio stored channels. Channel Setup: This option allows setting the receiver to start in a predefined channel. Favourite Channel List Name: It allows changing the name of the favourite groups.

  • Page 9: Q U I C K S E T U

    QUICK INSTALLATION GUIDE Language: This option allows choosing the language of the menus. TV System: This option allows choosing the video Standard and other parameters of the screen. Time & Timer Setting: Timer setting menu. OSD Setting: This option allows configuring the subtitles of the channel information. Parental Lock: In this option, user can lock the access to the menu and change the password of the receiver.

  • Page 10: Table Of Contents

    INDEX Safety Precaution Caution…..………………….......………………………………………………13 1. Panel & Remote Control Description 1.1. Front Panel Description……........…………………………14 1.2. Rear Panel Description……........………….…………………..14 1.3. Remote Control Description…..........…………………………..15 2. Basic Operations 2.0. Switch on STB………………………........………………………………...16 2.1. Standby ……………………..........…………………………………...16 2.2. TTX …………..........……………………………………..16 2.3. Mute……………..........………………………………………..16 2.4. Channel Number…………......……………………………………………………17 2.5.
  • Page 11 INDEX 3.1.4.1 Delete…............…………….…...24 3.1.4.2 Skip….......…………………………………..…………..24 3.1.4.3 Lock..….........………………………… …….……….25 3.1.4.4 Edit......…………………...………………………...25 3.1.5. Find……………......……………………..……..………………..…….25 3.2. Radio Channel List……........……………………………………..26 3.3 Channel Setup…………........………………………………..26 3.3.1. Start-up Channel……………........……………………………..26 3.3.2. Channel Play Type………......…………………………………..26 3.4. Favourite Channel List Name……..……………………………………..26 3.5. Delete All……....……………....………………………………….27 3.6. Restore channel list and settings………………..…………………………………….27 3.7.
  • Page 12 INDEX 6.5. Software Update………………………….………………………......41 6.5.1. RS232 Upgrade..............41 6.5.2. Upgrade by Satellite..............41 6.5.3. Upgrade by USB..............41 6 . 6 . S a t c o D X A u t o P r o g r a m m i n g … … … … … … … … … ........4 2 6.7.

  • Page 13: Safety Precaution

    SAFETY PRECAUTION Warning: The lightning flash with The exclamation point arrowhead symbol, within To reduce the risk of electric shock, within equilateral don’t open the cabinet. Refer servicing an equilateral triangle, is triangle intended to qualified personnel only. intended to alert the user to alert the user to to “dangerous voltage”...

  • Page 14: Panel & Remote Control Description

    PANEL & REMOTE CONTROL DESCRIPTION 1. PANEL & REMOTE CONTROL DESCRIPTION 1.1. FRONT PANEL DESCRIPTION 1. POWER: Switches the receiver on, or enters standby mode. To completely switch off the receiver, you have to use the switch on the back of the receiver. 2.

  • Page 15: Remote Control Description

    PANEL & REMOTE CONTROL DESCRIPTION 1. POWER: Switches receiver ON or in stand-by-mode. 2. 3-set LED:Shines as function control, showing the selected transmission code 1, 2 or 3 3. TV/R: Switches between TV and Radio channels. 4. CODE: Changes transmission code of the remote control. 5.

  • Page 16: Basic Operations

    BASIC OPERATIONS 2. BASIC OPERATIONS 2.0. SWITCH ON STB Switch the [Device’s Main Power] switch on. When the STB is first used it will display the quick setup page where the receiver can be configured quickly. For further use the STB will play the same channel as last time when it was switched off.

  • Page 17: Channel Number

    BASIC OPERATIONS 2. Press the [Mute] button again to restore the sound. 2.4. CHANNEL NUMBER In TV mode you can enter the channel number directly with your remote control unit and confirm the number with the OK button to change to the desired channel. 2.5.

  • Page 18: Epg

    BASIC OPERATIONS Reduced Channel List (OSD 4): You can use [ ] keys to navigate this list. 1. Press [Yellow] button to open the SAT list. After selecting a satellite the channel list will be reduced to the channels of this satellite.

  • Page 19: List

    BASIC OPERATIONS 2.14. LIST In TV mode, press [List] button to access directly to the “TV Channel List” menu or to the “Radio Channel List” menu. 2.15. FAVOURITES 1. In TV mode press the [Favourite] button to display the Favourite Group window on the screen as the picture beside shows (OSD 10).

  • Page 20: S U B T I T L E

    BASIC OPERATIONS 2.20. SUBTITLES In TV mode, press [Sub] button for activating / deactivating the channel subtitles, depending on the provider information. OSD 14 2.21. LNB SHORT When LNB is short, it will notify user on screen “LNB Short!” (OSD 14). Please check your cables and connections for shorts.

  • Page 21: Pvr

    BASIC OPERATIONS duration in the fast recording. - If you push “Exit”: it will make the fast recording and will obviate the temporised events that will get in conflict. Anyway, in the moment of the temporised event the user are inquired again about if he wants to carry out the programmed event.

  • Page 22: Marks

    BASIC OPERATIONS channel in the secondary screen. If you press the [Menu] key while doing PiP, several options will appear: (OSD 19): - [Red]: Interchange the channels between the main and secondary screen. - [Green]: Moves the position of the secondary screen.

  • Page 23: Channel

    CHANNEL 3. CHANNEL Press [Menu] in the TV mode to enter the main menu (OSD 20). 1. Press [ ] to select the Channel item. 2. Press [OK] to enter the selected item. In the Channel menu (OSD 21): 3. Press [ ] to select the wanted menu item.

  • Page 24: Move

    CHANNEL 3.1.2. MOVE 1. To move/change channels: Pushing the [Red] button, you will see a picture like OSD 24. You will be able to move or change the position of the channels: - Push again the [Red] button to move the channel. - Push the [Green] button to change the position of the channel.

  • Page 25: Lock

    CHANNEL (OSD 29) will be skipped when you change channels in TV mode after you confirm to save the changes when you leave this menu. OSD 30 3.1.4.3 LOCK In Channel Edit menu, press [Yellow] button to place a Lock icon behind the name of the highlighted channel.

  • Page 26: Radio Channel List

    CHANNEL and press [OK] on the RCU. 3. Press [Exit] button to close the Find window and brings you back to the channel list. 3.2. RADIO CHANNEL LIST Basically the operation of “Radio Channel List” is same as “TV Channel List” (OSD 35). OSD 35 3.3.

  • Page 27: Delete All

    CHANNEL 3.5. DELETE ALL To delete all channels: 1. Enter the password. The default password is “0000”. 2. After entering the password correct a safety question will show up where you have to confirm first (OSD 41). 3. Select “Yes” to delete all channels or “No” to cancel and confirm with [OK].

  • Page 28: Installation

    INSTALLATION 4. INSTALLATION Press [Menu] in the TV mode to enter the main menu (OSD 44). 1. Press [ ] to select the Installation item. 2. Press [OK] to enter the selected item. In the Installation menu (OSD 45): 3. Press [ ] to select the wanted menu item.

  • Page 29: Multi Search

    INSTALLATION 3. DiSEqC1.0: Use [ ] to switch the options of DiSEqC switches. 4. On “TP Index” item use [ ] to select the desired transponder. 5. In the “FTA Only” item, press [ ] to select to scan only free channels or even scrambled channels.

  • Page 30: Tp Scan

    INSTALLATION 4.3. TP SCAN When you enter “TP Scan” menu a window like the one beside will be displayed (OSD 52): 1. On “Satellite” item, press [ ] to select the satellite you want to scan or press [OK] to open the satellite list for selection.

  • Page 31: Satellite List

    INSTALLATION will search the selected TP. In case you select “On”, the NIT (Network Identification) will be identified and the receiver will automatically search all the TP of this network. 6. Press [OK] to start scanning. 7. On the “TP Scan” item, press [Exit] to cancel the scanning and saving the found channels.

  • Page 32: Satellite Guide

    SYSTEM SETUP 4.6. SATELLITE GUIDE When you enter “Satellite Guide” menu, you will see the screen like beside (OSD 63). Here you can enter your local longitude and latitude and the satellite’s longitude. The receiver calculates the antenna’s azimuth and elevation to point your antenna to the selected satellite.

  • Page 33: L A N G U A G

    5. SYSTEM SETUP Press [Menu] in the TV mode to enter the main menu (OSD 66). 1. Press [ ] to select the System Setup item. 2. Press [OK] to enter the selected item. In the System Setup menu (OSD 67): 3.

  • Page 34: T V S Y S T E

    SYSTEM SETUP 5.2. TV SYSTEM When you enter the “TV System” menu you will see the screen like below (OSD 69): 1. Display Mode is used to switch the display mode. You can select from Auto / PAL / PAL-M / NTSC 3.58/NTSC 4.43. Press [ ] to select the desired mode.
  • Page 35 SYSTEM SETUP that will appear on the screen). 4. “DVR Recorder” / “Radio Recorder” option: If you select this option, the following fields of the image will be shown in order to be configured (OSD 72). - Start channel: Press [OK] to open the channel list and select the channel you want to record.

  • Page 36: Local Time Setting

    SYSTEM SETUP fields will be active in order that you can configure them (OSD 74). - Start message: Use the keys [ ] to select the text you want to appear on the screen - Start date: Introduce using the numerical keys on the remote control the date on which you want to activate the service.

  • Page 37: Osd Setting

    SYSTEM SETUP 5.4. OSD SETTING When you select “OSD Setting” you will see a screen like beside (OSD 78): 1. Subtitle Display: Press [ ] to select “On” or “Off”. If the current channel has subtitle information, it will be displayed if this function is “On”.

  • Page 38: Lnb Power

    SYSTEM SETUP NOTE: The default password is 0000 5. Press [Exit] to leave the “Parental Lock” menu. 5.6. LNB POWER Here you can set the power output to the LNB (OSD 80). If your receiver is connected to the LNB directly then you need to set the LNB Power to “On”.

  • Page 39: Tools

    TOOLS 6. TOOLS Press [Menu] in the TV mode to enter the main menu (OSD 83). 1. Press [ ] to select the Tools item. 2. Press [OK] to enter the selected item. In the Tools menu (OSD 84): 3. Press [ ] to select the wanted menu item.

  • Page 40: Game

    TOOLS 6.3. GAME When you enter “Game” menu, you will see three Games include Tetris, Snake and Othello (OSD 87). 6.3.1. TETRIS 1. Mark “Setup” and press [ ] to select the level (speed). 2. Mark “Start” and press [OK] to start the game. 3.

  • Page 41: Software Update

    TOOLS 6.5. SOFTWARE UPGRADE There are two ways of upgrading the software of the receiver as you can see at OSD 89. 6.5.1. RS232 UPGRADE 1. This function allows you to upgrade the software of the receiver. This can be done from PC to receiver or from a master receiver to a slave receiver.

  • Page 42: S A T C O D X A U T O P R O G R A M M I N

    TOOLS The last software version to be loaded must be placed at the root path of your USB device. 1. Upgrade mode: Select with [ ], the mode of upgrading. 2. Update file: Select with [ ], the name of the file to be loaded.

  • Page 43: Dvr Management

    DVR MANAGEMENT 7. MEDIA MANAGEMENT Press the key [Menu] on the remote control to go to the main menu (OSD 97). 1. Press the arrows on the remote control [ ] to settle the option of DVR management. 2. Press [Ok] to enter the submenu DVR Management In the submenu DVR management (OSD 98): 3.

  • Page 44: Recording Management

    DVR MANAGEMENT 7.1.1. RECORD MANAGEMENT - RECORD LIST With this option of the menu, you can reproduce, rename, block and delete recordings. You can go to this option using the menu or directly pressing the key [PVR] on the remote control. Information on the window (OSD 99): 7.1.1.1.

  • Page 45: How To Delete All Recordings

    DVR MANAGEMENT 7.1.1.5. HOW TO DELETE ALL THE RECORDINGS To delete all of the recordings, press the [Blue] key. - A window appears and asks for the password to delete all the recordings. If it has not been modified, it is by default the code “0000”.

  • Page 46: Addind A New File To The List

    DVR MANAGEMENT - RENAME 1. Press the [Red] button to rename the file. 2. A new window appears where you can change the name of the recording moving through cursors. Press OK to exit and modify the name. 3. Once the change is done, i will be not modified until you do not exit from the list.

  • Page 47: Search For File

    DVR MANAGEMENT 7.1.2.3. SEARCH FOR FILE 1. Press the [Blue] button to open the “Search” window. Use the buttons [ ] to write the characters of the file name. Press [OK] to confirm the characters. (OSD 111) 2. After writing down the characters, select OK and press [OK] on the remote control.

  • Page 48: Picture .Jpg Viewer

    DVR MANAGEMENT 7.1.2.7. PICTURE .JPG VIEWER 1. Press [OK] over the file .JPG that you want to show. 2. The selected picture will be shown on the screen. If the file is included into the Picture Playlist, they all will be shown in “slide show”...

  • Page 49: Record Path

    DVR MANAGEMENT 7.2.5. RECORD PATH In this option you will have to select the HDD partition where will be saved your recordings. 7.2.6. FORMAT DISK This option will format the hard disk, erasing it completely. When you select this option, a window appears and asks for a password to format the hard disk.

  • Page 50: Technical Specification

    TECHNICAL SPECIFICATION 8. TECHNICAL SPECIFICATION VIDEO Decoding MPEG-2 & MEPG-1 compatible Bit rate Max 15Mbps Output PAL/NTSC Aspect ratio 4:3, 16:9, Auto Active pixel 720x480 @ 30fps; 720x576 @25fps Output connector Scart / RCA AUDIO Decoding MPEG-2/MPEG-1 layer I & II Mode Mono, Dual, Stereo, Joint stereo Bit rate...

Table of Contents