Remote Controller Setup; Remote Mode Setup; Activities Setup - Integra DTR-70.3 Instruction Manual

■
Gateway
Enter the gateway address provided by your ISP.
■
DNS Server
Enter the DNS server address provided by your ISP.
■
Proxy URL
To use a Web proxy, enter its URL here.
■
Proxy Port
If you're using a Web proxy, enter a proxy port number
here.
■
Network Control
Enable
Disable
This setting enables or disables control over the network.
Note
• When set to "Enable", the NET indicator is dimly-lit and the
power consumption slightly increases in standby mode.
■
Control Port
"49152" to "65535"
This is the network port used for control over the network.
Note
• When the "Network Control" setting is set to "Disable", this
setting is cannot be selected.
Firmware Update
See "Firmware Update" for the update procedure
(➔ page 90).
Note
• Perform the firmware update only when such an announcement
is posted on the Integra web site. Visit the Integra web site for
the latest information.
• It takes maximum 60 minutes to complete the firmware update.
■
Version
Displays the current version of the firmware.
■
Receiver
via NET:
Performs the firmware update via Internet. Check
the network connection before updating.
via USB:
Performs the firmware update from a USB device.
These settings allow you to update the AV receiver's
firmware. Do not shutdown the power of the AV receiver
while updating.
■
Universal Port
via NET:
Performs the firmware update via Internet. Check
the network connection before updating.
via USB:
Performs the firmware update from a USB device.
These settings allow you to update Onkyo dock's
firmware. Do not shutdown the power of the AV receiver
while updating.
Note
• This update shall not be performed when no dock is connected
En
to the UNIVERSAL PORT jack.
66

Remote Controller Setup

Main menu Remote Controller Setup

Remote Mode Setup

See "Looking up for Remote Control Code"
(➔ page 78).

Activities Setup

Via onscreen menu, you can specify what actions will be
taken by the Easy macro command in the Easy macro
mode (➔ page 43).
First, select the Activities (MY MOVIE, MY TV, or MY
MUSIC) that you want to configure.
■
Source
BD/DVD, VCR/DVR, CBL/SAT, GAME, PC,
AUX, TUNER, TV/CD, PHONO, PORT, NET,
USB
With this setting, you can choose the target input source of
the Easy macro.
■
TV Power On
Enable
Disable
With this setting, you can specify whether or not to turn on
your TV.
■
Source Power On
Enable
Disable
With this setting, you can specify whether or not to turn on
the source component.
■
Receiver Power On
Enable
Disable
With this setting, you can specify whether or not to turn on
the AV receiver.
■
Receiver Source Change
Enable
Disable
With this setting, you can specify whether or not to change
the input source.
■
Source Play
Enable
Disable
With this setting, you can specify whether or not to start
playback.