Table of Contents
Advertisement
No.
Jack/Port
DIGITAL IN
COAXIAL
OPTICAL
USB
*2
ETHERNET
MONITOR OUT
BD/DVD IN
VCR/DVR IN
CBL/SAT IN
GAME IN
PC IN
TV/CD IN
PHONO IN
COMPONENT
IN 1 (BD/DVD)
VIDEO
IN 2 (CBL/SAT)
IN 3 (GAME)
MONITOR OUT
PC IN
*4
MULTI CH (Multichannel input)
Note
*1
DTR-80.3 only.
*2
Do not connect the AV receiver's USB port to a USB port on your computer. Music on your computer cannot be played through the
AV receiver in this way.
*3
Connect a turntable (MM) that has a built-in phono preamp to TV/CD IN, or connect it to PHONO IN with the phono preamp turned
off. If your turntable (MM) doesn't have a phono preamp, connect it to PHONO IN. If your turntable has a moving coil (MC) type
cartridge, you'll need a commercially available MC head amp or MC transformer to connect to PHONO IN. See your turntable's
manual for details.
If your turntable has a ground wire, connect it to the AV receiver's GND screw. With some turntables, connecting the ground wire
may produce an audible hum. If this happens, disconnect it.
*4
When you connect your personal computer to PC IN and select the PC input selector, the video of the personal computer is output
from the HDMI outputs. However, if you have assigned the HDMI inputs to the PC input selector, the AV receiver will output
signals received from the HDMI inputs instead of signals from PC IN, based on the priority order of HDMI > component video > PC
IN (analog RGB). To have the signals output from PC IN, select "- - - - -" for "PC" in the "HDMI Input" setting
*5
Before using the multichannel input, you must assign it to an input selector. See "Analog Audio Input"
select the multichannel input, see "Audio Selector"
"Subwoofer Input Sensitivity"
• With connection
, you can enjoy Dolby Digital and DTS. (To record or listen the audio in Zone 2/3/4 as well, use
and
.)
• With connection
, you can listen to and record audio from external components while you are in Zone 2/3/4.
• With connection
, if your Blu-ray Disc/DVD player has both the main stereo and multichannel outputs, be sure to
connect to the main stereo.
■
How to record a video source
With the connections described above, you cannot record the videos through the AV receiver. See "Recording" about
connections for video recording
1 (BD/DVD)
2 (VCR/DVR)
3 (CBL/SAT)
1 (GAME)
2 (TV/CD)
*1
3
*5
(➔
page 60). To adjust the subwoofer sensitivity of the multichannel input, see
page 49).
(➔
(➔
page 44).
Components
Blu-ray Disc/DVD player
VCR or DVD recorder/digital video recorder, RI
dock
Satellite/cable set-top box, RI dock, etc.
Game console
TV, CD player
Other components
MP3 player, USB flash drive
Router
TV, projector, etc.
Blu-ray Disc/DVD player
VCR or DVD recorder/digital video recorder, RI
dock
Satellite/cable set-top box, etc.
Game console, RI dock
Personal computer
TV, CD player, cassette tape deck, MD, CD-R,
Turntable
*3
, RI dock
Turntable
*3
Blu-ray Disc/DVD player, RI dock
Satellite/cable set-top box, RI dock, etc.
Game console
TV, projector, etc.
Personal computer
DVD player, DVD-Audio, Super Audio CD-
capable player, MPEG decorder
Assignable
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
(➔
page 47).
(➔
page 48) for details. To
En
19
Hide quick links:
Advertisement
Table of Contents
