A/V Sync; Name Edit - Integra DTR-70.2 Instruction Manual

IntelliVolume
■
IntelliVolume
–12dB to 0dB to +12dB in 1 dB steps.
With IntelliVolume, you can set the input level for each
input selector individually. This is useful if one of your
source components is louder or quieter than the others.
Use / to set the level.
If a component is noticeably louder than the others, use
to reduce its input level. If it's noticeably quieter, use
increase its input level.

A/V Sync

■
A/V Sync
0msec to 250msec in 2 msec steps.
When using your DVD player's progressive scanning
function, you may find that the picture and sound are out
of sync. With the A/V Sync setting, you can correct this
by applying a delay to the audio signal.
To view the TV picture while setting the delay, press
Enter.
To return to the previous screen, press Return.
If HDMI Lip Sync is enabled
play supports HDMI Lip Sync, the displayed delay time
will be the summation of the A/V Sync delay time and the
HDMI Lip Sync delay time. The HDMI Lip Sync delay
time is displayed underneath in parentheses.
Note
• A/V Sync is disabled when the Direct listening mode is used
with an analog input source.
• "A/V Sync" is not operable when the input selector is set to
"NET/USB".

Name Edit

You can enter a custom name for each individual input
selector (excluding Tuner) and radio preset for easy iden-
tification. When entered, the custom name will appear on
the display.
The custom name is edited using the character input
screen.
■
Name
1
Use / / /
press Enter.
Repeat this step to enter up to 10 characters.
2
When you've finished, to store a name, be sure
to use / / /
Enter. Otherwise it will not be saved.
En
62
67) and your TV or dis-
(➔
to select a character, and then
to select "OK", and then press
Name input area
4-4. Name Edit
Name
a b c d e
n o p q r
1 2 3 4 5
{ } | :
Shift Space
+10 Shift
to
A B C D E
N O P Q R
! @ # $ %
[ ] ; '
Shift Space
+10 Shift
*1
Shift :
Switches the displayed character.
Space:
Enters a space character.
(Left)/ (Right):
Selected when the cursor is moved within the Name
input area.
*2
Back Space :
"Back Space" moves the cursor backward one char-
acter space. In addition, "Back Space" deletes the
character to the left of the cursor.
OK:
Selects when the entry is complete.
Tip
*1 You can also be performed on the remote controller by
using +10.
*2 Press CLR on the remote controller, you can delete all
characters in the input.
To correct a character:
1
Use / / /
" "(Right), and then press Enter.
2
Press Enter several times to select the incorrect
character (The cursor moves one letter each
time Enter is pressed).
3
Use / / /
and then press Enter.
Note
• To name a radio preset, use Tuner to select AM or FM, and then
select the preset (➔ 33).
• (North American models) You cannot enter a custom name for
SIRIUS radio presets.
• "Name Edit" is not operable when the input selector is set to
"NET/USB".
To restore a custom name to the default, erase the custom
name by entering an empty white space for each letter.
BD/DVD
f g h i j k l m
s t u v w x y z
6 7 8 9 0 – `
< > ?
Back Space OK
CLR All Erase
F G H I J K L M
S T U V W X Y Z
( ) _ ~
^ &
, . /
Back Space OK
CLR All Erase
to select " "(Left) or
to select the correct character,