Listening Mode Preset - Integra DTR-20.2 Instruction Manual

Note
• If the "Game Mode" setting is set to "On"
is fixed at "Off".
■
Brightness *1*2
–50 to 0 to +50
With this setting you can adjust the picture bright-
ness. "–50" is the darkest. "+50" is the brightest.
■
Contrast *1*2
–50 to 0 to +50
With this setting you can adjust contrast. "–50" is the
least. "+50" is the greatest.
■
Hue *1*2
–20 to 0 to +20
With this setting you can adjust the red/green bal-
ance. "–20" is the strongest green. "+20" is the
strongest red.
■
Saturation *1*2
–50 to 0 to +50
With this setting you can adjust saturation. "–50" is
the weakest color. "+50" is the strongest color.
Tip
*1 This procedure can also be performed on the remote controller
by using the Home menu (➔
*2 Press CLR if you want to reset to the default value.
43)
(➔
, this setting
22).

Listening Mode Preset

You can assign a default listening mode to each input
source that will be selected automatically when you select
each input source. For example, you can set the default lis-
tening mode to be used with Dolby Digital input signals.
You can select other listening modes during playback, but
the mode specified here will be resumed once the AV
receiver has been set to Standby.
Main menu Listening Mode Preset
1
Use / to select the input source that you want to
set, and then press Enter.
For Tuner input selector only "Analog" will be
available.
5. Listening Mode Preset
1. BD/DVD
2. VCR/DVR
3. CBL/SAT
4. GAME
5. PC
6. TUNER
7. TV/CD
8. PORT
Note
• If you connect an input component (such as UP-A1 series
Dock that seated iPod) to the UNIVERSAL PORT jack,
you can assign only listening modes for the analog sound
to Port selector.
2
Use / to select the signal format that you want
to set, and then use
Only listening modes that can be used with each
input signal format can be selected
The "Last Valid" option means that the listening
mode selected last will be used.
Analog/PCM:
With this setting, you can specify the listening mode
to be used when an analog (CD, TV, LD, VHS, MD,
turntable, radio, cassette, cable, satellite, etc.) or
PCM digital (CD, DVD, etc.) audio signal is played.
Mono/Multiplex Source:
With this setting, you can specify the listening mode
to be used when a mono digital audio signal is
played (DVD, etc.).
2ch Source:
With this setting, the default listening mode for 2-
channel (2/0) stereo sources in a digital format, such
as Dolby Digital or DTS.
Dolby D/Dolby D +/TrueHD:
With this setting, you can specify the listening mode
to be used when a Dolby Digital or Dolby Digital
Plus format digital audio signal is played (DVD,
etc.). Specifies the default listening mode for Dolby
TrueHD sources, such as Blu-ray or HD DVD (input
via HDMI).
DTS/DTS-ES/DTS-HD:
With this setting, you can specify the listening mode
to be used when a DTS or DTS-HD High Resolution
format digital audio signal is played (DVD, LD, CD,
etc.). Specifies the default listening mode for DTS-
/ to select a listening mode.
(➔ 30 - 34).
En
45