Muting The Av Receiver; Using The Sleep Timer; Using The Home Menu - Integra DTR-20.2 Instruction Manual

Muting the AV Receiver

You can temporarily mute the output of the AV receiver.
Press Receiver followed by Muting.
The output is muted and the MUTING indicator
flashes on the display.
Tip
• To unmute, press Muting again or adjust the volume.
• The Mute function is cancelled when the AV receiver is set to
Standby.

Using the Sleep Timer

With the sleep timer, you can set the AV receiver to turn
off automatically after a specified period.
Press Receiver followed by Sleep repeatedly to
select the required sleep time.
The sleep time can be set from 90 to 10 minutes in
10 minute steps.
The SLEEP indicator lights on the display when the
sleep timer has been set. The specified sleep time
appears on the display for about five seconds, then
the previous display reappears.
Tip
• If you need to cancel the sleep timer, press Sleep repeatedly
until the SLEEP indicator goes off.
• To check the time remaining until the AV receiver sleeps, press
Sleep. Note that if you press Sleep while the sleep time is
being displayed, you'll shorten the sleep time by 10 minutes.

Using the Home Menu

The Home menu provides you quick access to frequently
used menus without having to go through the long stan-
dard menu. This menu enables you to change settings and
view the current information.
1
Press Receiver followed by Home.
The following information will be superimposed on
the TV screen.
BD/DVD
Audio Bass
Video Treble
Info Subwoofer Level
Input Sel Center Level
Listening Mode Dynamic EQ
Dynamic Volume
En
22
2
Note
*1
*2
*3
*4
0dB
*5
Use / / / to make the desired selection.
Audio
*1
You can change the following settings: "Bass",
"Treble", "Subwoofer Level", "Center
Level", "Dynamic EQ", "Dynamic Volume",
"Late Night", "Music Optimizer", "Re-EQ",
"Re-EQ(THX)", and "Audio Selector".
See also:
• "Audyssey" (➔ 41)
• "Using the Audio Settings"
Video
*2
You can change the following settings: "Wide
Mode" and "Picture Mode". The remote con-
troller's Video acts as a shortcut for this menu.
See also:
• "Picture Adjust" (➔
Info
*3*4
You can view the information of the following
items: "Audio", "Video", and "Tuner".
Input
*4*5
You can select the input source while viewing
the information as follows: the name of input
selectors, input assignments, and radio infor-
mation, and ARC function setting.
Press Enter to display the current input source,
followed by / to select the desired input
source. Pressing Enter again switches to the
selected input source.
Listening Mode
You can select the listening modes that are
grouped in the following categories: MOVIE/
TV, MUSIC, GAME, and THX.
Use / to select the category and
select the listening mode. Press Enter to
switch to the selected listening mode.
If Direct listening mode is selected, "Dynamic EQ" and
"Dynamic Volume" cannot be selected.
Only when you have selected "Custom" in the "Picture
Mode" (➔ 44), pressing Enter allows you to adjust the fol-
lowing items via the Home menu; "Brightness", "Contrast",
"Hue", and "Saturation". Press Return to return to the orig-
inal Home menu.
Depending on the input source and listening mode, not all
channels shown here output the sound.
When you have entered a custom name in "Name Edit"
(➔ 43), the input source is displayed with that name. But
even if not, the component name may be displayed if the AV
receiver receives it via HDMI connection
For the Port input selector, the name of Universal Port Option
Dock will be displayed.
48)
(➔
43)
/ to
(➔ 15).