Record - Yealink EXP40 User Manual

If you leave this field blank, the LCD screen will display the default label "Group
Listening".
4. Click Confirm to accept the change.
Call recording allows users to record calls. Normally, there are 2 main methods to
trigger a recording on a certain server. We call them record and URL record. Record is
for the phone to send the server a SIP INFO message containing a specific header. URL
record is for the phone to send an HTTP URL to the server. The server processes these
messages and decides to start or stop a recording.
You can configure a DSS key as the record key. Then you can record calls using the
record method by pressing the record key.
To configure a DSS key as the record key:
1. Click on DSSKey->Ext Key.
2. In the desired DSS key field, select Record from the pull-down list of Type.
3. Enter the desired value in the Label field or leave it blank.
Configuration
23