Daewoo DWC-054R Use & Care Manual page 13

FUNCTION
ON TIMER
TIMER/
CANCEL
Push the 'TIMER/CANCEL'
button when unit is off.
(REMOCON ONLY)
SLEEP MODE
SLEEP
Push the 'SLEEP' button in
'COOLING' mode.
(REMOCON ONLY)
• ROOM TEMPERATURE DISPLAY.
Over 45°C or 100°F
5°C~45°C or 41°F~99°F
Below 5°C (41°F)
OPERATION
1. Timer is changed to as follows by
pushing "TIMER/CANCEL" button.
(1hr 2hr 3hr 4hr 5hr 6hr 8hr
10hr 12hr 16hr 20hr 24hr cancel)
2. The unit starts working after set time
is over in cooling mode with last
temperature set.
3. If you want to cancel timer, push this
button again at any time.
1. SLEEP MODE is changed as follows
by pushing "SLEEP" button.
(L1 L2 cancel)
* L1 Mode
– The unit is off after 4 hours.
– The desired Temp is increased 3°C
(5.4°F) for 4 hours.
– Fan speed is set to 'LOW'.
* L2 MODE
– The unit works as follow.
+1 C +1 C
ON
OFF
2hr 2hr 2hr 2hr 2hr
– Fan speed is set to 'LOW'.
2. Set proper desired room temperature,
fan speed.
3. This mode can be selected in
'COOLING' mode only.
DISPLAY TEMPERATURE
1. 'TIMER' lamp lights.
2. Setting time is displayed.
3. After a few seconds, display is
changed to current room
temperature. and 'ROOM TEMP'
lamp lights.
1. 'L1' or 'L2' is displayed.
2. 'ROOM TEMP' and 'DESIRED
TEMP' lamp is off.
13
DISPLAY
ROOM
FAN
TEMP .
TEMP
DESIRED
TURBO
TEMP .
TIMER
ENERGY
COOLING
SAVE