Adjusting The Rear Brake Lock Lever Cable - Yamaha MAJESTY YP400A Owner's Manual

PERIODIC MAINTENANCE AND ADJUSTMENT
brake lever ends. If there is free play,
have a Yamaha dealer inspect the
brake system.
WARNING
1
A soft or spongy feeling in the brake
lever can indicate the presence of air
2
in the hydraulic system. If there is air
in the hydraulic system, have a
3
Yamaha dealer bleed the system be-
fore operating the vehicle. Air in the
hydraulic system will diminish the
4
braking performance, which may re-
sult in loss of control and an acci-
5
dent.
6
7
8
9
Adjusting the rear brake lock
lever cable
EWA14211
1
(a)
(b)
1. Adjusting nut
2. Rear brake lock lever cable length
Rear brake lock lever cable adjustment
may be required if the rear brake lock
lever does not hold properly. When the
rear brake lock lever is not in use, the
rear brake lock lever cable length
should measure 45 mm to 47 mm (1.77
in to 1.85 in) at the rear brake caliper.
Periodically check the rear brake lock
lever cable length and, if necessary,
adjust it as follows.
To increase the rear brake lock lever
cable length, turn the adjusting nut at
the rear brake caliper in direction (a).
EAU33473 To decrease the rear brake lock lever
cable length, turn the adjusting nut in
direction (b).
2
If proper adjustment cannot be ob-
tained as described, have a Yamaha
dealer make this adjustment.
6-24
WARNING
EWA10650