Adjusting The Shock Absorber Assemblies; Sidestand - Yamaha MAJESTY YP400A Owner's Manual

Hide thumbs Also See for MAJESTY YP400A:
Table of Contents

Advertisement

INSTRUMENT AND CONTROL FUNCTIONS
Adjusting the shock absorber
assemblies
1
1
2
2
3
(b)
4
1. Spring preload adjusting ring
5
2. Position indicator
3. Spring preload adjusting tool
6
Each shock absorber assembly is
equipped with a spring preload adjust-
7
ing ring.
NOTICE
8
To avoid damaging the mechanism,
do not attempt to turn beyond the
9
maximum or minimum settings.
WARNING
Always adjust both shock absorber
assemblies equally, otherwise poor
EAU14891
handling and loss of stability may
result.
Adjust the spring preload as follows.
To increase the spring preload and
5
4
thereby harden the suspension, turn
3
2
the adjusting ring on each shock ab-
1
sorber assembly in direction (a). To de-
crease the spring preload and thereby
(a)
soften the suspension, turn the adjust-
ing ring on each shock absorber as-
3
sembly in direction (b).
G
Align the appropriate notch in the
adjusting ring with the position in-
dicator on the shock absorber.
G
Use the spring preload adjusting
tool included in the owner's tool kit
to make this adjustment.
Spring preload setting:
Minimum (soft):
ECA10101
Standard:
Maximum (hard):
EWA10210
1
2
5
3-21

Sidestand

The sidestand is located on the left side
of the frame. Raise the sidestand or
lower it with your foot while holding the
vehicle upright.
TIP
The built-in sidestand switch is part of
the ignition circuit cut-off system, which
cuts the ignition in certain situations.
(See further down for an explanation of
the ignition circuit cut-off system.)
WARNING
The vehicle must not be ridden with
the sidestand down, or if the side-
stand cannot be properly moved up
(or does not stay up), otherwise the
sidestand could contact the ground
and distract the operator, resulting
in a possible loss of control.
Yamaha's ignition circuit cut-off
system has been designed to assist
the operator in fulfilling the respon-
sibility of raising the sidestand be-
fore starting off. Therefore, check
this system regularly as described
below and have a Yamaha dealer re-
EAU15301
EWA10240

Advertisement

Table of Contents
loading

Table of Contents