Adjusting The Rear Brake Lock Lever Cable; Checking The Front And Rear Brake Pads - Yamaha MAJESTY 400 Owner's Manual

PERIODIC MAINTENANCE AND MINOR REPAIR
Adjusting the rear brake lock
lever cable
1
2
1
2
(a)
3
(b)
4
1. Adjusting nut
5
2. Rear brake lock lever cable length
Rear brake lock lever cable adjustment
6
may be required if the rear brake lock
lever does not hold properly. When the
7
rear brake lock lever is not in use, the
rear brake lock lever cable length
should measure 45 mm to 47 mm (1.77
8
in to 1.85 in) at the rear brake caliper.
Periodically check the rear brake lock
9
lever cable length and, if necessary,
adjust it as follows.
To increase the rear brake lock lever
cable length, turn the adjusting nut at
the rear brake caliper in direction (a).
EAU33473 To decrease the rear brake lock lever
cable length, turn the adjusting nut in
direction (b).
WARNING
If proper adjustment cannot be ob-
tained as described, have a Yamaha
dealer make this adjustment.
6-26
Checking the front and rear
brake pads
The front and rear brake pads must be
EWA10650
checked for wear at the intervals spec-
ified in the periodic maintenance and
lubrication chart.
Front brake pads
1
1
1. Wear indicator groove
Each front brake pad is provided with
wear indicator grooves, which allow
you to check the brake pad wear with-
out having to disassemble the brake.
To check the brake pad wear, check
the wear indicator grooves. If a brake
pad has worn to the point that the wear
EAU22390
EAU22430