V-Belt Replacement Indicator - Yamaha MAJESTY YP400A Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS
self automatically and the display will
return to the prior mode after refueling
and traveling 5 km (3 mi).
TIP
1
The display cannot be changed back to
"Trip F" after pushing the "RESET" but-
2 ton.
3
Fuel meter
With the key in the "ON" position, the
fuel meter indicates the amount of fuel
4
in the fuel tank. The display segments
of the fuel meter disappear towards "E"
5
(Empty) as the fuel level decreases.
When the fuel level reaches the bottom
6
segment near "E", the fuel level warn-
ing indicator and the bottom segment
will flash. Refuel as soon as possible.
7
Coolant temperature meter
8
With the key in the "ON" position, the
coolant temperature meter indicates
the temperature of the coolant. The
9
coolant temperature varies with chang-
es in the weather and engine load. If
the top segment and coolant tempera-
ture warning indicator flash, stop the
vehicle and let the engine cool. (See
page 6-37.)
NOTICE
Do not continue to operate the en-
gine if it is overheating.
Oil change indicator "OIL"
This indicator flashes at the initial 1000
km (600 mi), then at 5000 km (3000 mi)
and every 5000 km (3000 mi) thereafter
to indicate that the engine oil should be
changed.
After changing the engine oil, reset the
oil change indicator. (See page 6-12.)
If the engine oil is changed before the
oil change indicator comes on (i.e. be-
fore the periodic oil change interval has
been reached), the indicator must be
3-7
reset after the oil change for the next
periodic oil change to be indicated at
the correct time. (See page 6-12.)
The electrical circuit of the indicator can
be checked according to the following
procedure.
1. Set the engine stop switch to "
and turn the key to "ON".
2. Check that the indicator comes on
for a few seconds and then goes
off.
ECA10021
3. If the indicator does not come on,
have a Yamaha dealer check the
electrical circuit.
TIP
The oil change indicator may flash
when the engine is revved with the
scooter on the centerstand, but this
does not indicate a malfunction.

V-belt replacement indicator

"V-BELT"
This indicator flashes every 20000 km
(12500 mi) when the V-belt needs to be
replaced.
The electrical circuit of the indicator can
be checked according to the following
procedure.
"