Coolant - Yamaha MAJESTY YP400A Owner's Manual

PERIODIC MAINTENANCE AND ADJUSTMENT
1
2
2
3
1. Final transmission oil filler cap
2. Final transmission oil drain bolt
4
5. Install the final transmission oil
drain bolt, and then tighten it to the
5
specified torque.
6
Tightening torque:
Final transmission oil drain bolt:
20 Nm (2.0 m·kgf, 14.5 ft·lbf)
7
6. Refill with the specified amount of
8 the recommended final transmis-
sion oil, and then install and tighten
the oil filler cap. WARNING! Make
9
sure that no foreign material en-
ters the final transmission case.
Make sure that no oil gets on the
tire or wheel.
[EWA11311]
Recommended final transmission
1
oil:
See page 8-1.
Oil quantity:
0.25 L (0.26 US qt, 0.22 Imp.qt)
7. Check the final transmission case
for oil leakage. If oil is leaking,
check for the cause.

Coolant

The coolant level should be checked
before each ride. In addition, the cool-
ant must be changed at the intervals
specified in the periodic maintenance
and lubrication chart.
To check the coolant level
TIP
6-16
1. Place the vehicle on a level sur-
face and hold it in an upright posi-
tion.
G
The coolant level must be checked
on a cold engine since the level
varies with engine temperature.
G
Make sure that the vehicle is posi-
tioned straight up when checking
the coolant level. A slight tilt to the
side can result in a false reading.
2. Pull up the right floorboard mat as
shown.
EAU20070
EAU34193