Replacing The License Plate Light Bulb; Replacing An Auxiliary Light Bulb - Yamaha MAJESTY 400 Owner's Manual

PERIODIC MAINTENANCE AND MINOR REPAIR
Replacing the license plate
light bulb
1. Place the scooter on the center-
1 stand.
2. Remove cowling
page 6-7.)
2
3. Remove the license plate light cov-
er and license plate light lens by
3
removing the screws.
4
5
6
7
1. License plate light lens
8
2. License plate light cover
3. Screw
9
4. Remove the defective bulb by
pushing it in and turning it counter-
clockwise.
EAU34271
B. (See
1. Bulb
5. Insert a new bulb into the socket,
push it in, and then turn it clock-
1
wise until it stops.
2
6. Install the license plate light lens
and license plate light cover by in-
stalling the screws.
7. Install the cowling.
3
Replacing an auxiliary light
1
bulb
1. Screw
2. Windshield
6-38
1. Place the scooter on the center-
stand.
2. Remove panel A. (See page 6-7.)
3. Remove the windshield by remov-
ing the screws.
1
4. Remove the front turn signal light
unit by removing the screws.
EAU42800
2