Adjusting The Shock Absorber Assemblies - Yamaha MAJESTY 400 Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS
1
1
2
3
1. Rider seat
4
CAUTION:
Keep the following points in mind
5
when using the storage compart-
ment.
6
G
Since the storage compartment
accumulates heat when ex-
7
posed to the sun, do not store
anything susceptible to heat in-
side it.
8
G To avoid humidity from spread-
ing through the storage com-
9
partment, wrap wet articles in a
plastic bag before storing them
in the compartment.
G
Since the storage compartment
may get wet while the scooter is
being washed, wrap any articles
stored in the compartment in a
plastic bag.
G Do not keep anything valuable
or breakable in the storage com-
partment.
CAUTION:
Do not leave the rider seat open for
an extended period of time, other-
wise the light may cause the battery
ECA10080
to discharge.
WARNING
Do not exceed the following loading
limits:
G
Front storage compartment A:
2 kg (4 lb)
G
Rear storage compartment: 5 kg
(11 lb)
G Maximum load for the vehicle:
YP400 189 kg (417 lb)/YP400A
185 kg (408 lb)
3-18
Adjusting the shock absorber
assemblies
2
1
ECA11100
(b)
EWA11170
1. Spring preload adjusting ring
2. Position indicator
3. Spring preload adjusting tool
Each shock absorber assembly is
equipped with a spring preload adjust-
ing ring.
CAUTION:
Never attempt to turn an adjusting
mechanism beyond the maximum or
minimum settings.
WARNING
Always adjust both shock absorber
assemblies equally, otherwise poor
EAU14890
5
4
3
2
1
(a)
3
ECA10100
EWA10210