INSTRUMENT AND CONTROL FUNCTIONS
●
Since the storage compartment
may get wet while the scooter is
being washed, wrap any articles
stored in the compartment in a
plastic bag.
●
Do not keep anything valuable
or breakable in the storage com-
partment.
3
To store a helmet in the storage com-
partment, place the helmet with the
front facing backward.
TIP
●
Some helmets cannot be stored in
the storage compartment because
of their size or shape.
●
Do not leave your scooter unat-
tended with the seat open.
Windshield
To suit the rider's preference, the wind-
shield height can be changed to one of
four positions.
To adjust the windshield height
1. Remove the bolts on each side of
the windshield.
1
ZAUM0797
1. Windshield
2. Bolt
2. Move the windshield to the desired
position.
3. Install the bolts and tighten them to
the specified torque.
Tightening torque:
Windshield bolt:
4 Nm (0.4 m·kgf, 2.9 ft·lbf)
3-12
EAUM2490
WARNING
After adjusting the windshield:
●
Securely tighten the windshield
bolts.
●
Turn the handlebar to the left
and right to make sure that the
handlebar is not obstructed and
that the windshield does not
contact any other parts.
2
●
Open the throttle and make sure
that the throttle grip returns
properly when released, other-
wise an accident or injury could
result.
EWA10920