Replacing A Headlight Bulb - Yamaha XCITY VP250 Owner's Manual

PERIODIC MAINTENANCE AND ADJUSTMENT

Replacing a headlight bulb

This model is equipped with halogen
bulb headlights. If a headlight bulb
burns out, replace it as follows.
NOTICE
Take care not to damage the follow-
ing parts:
●
Headlight bulb
Do not touch the glass part of
the headlight bulb to keep it free
from oil, otherwise the transpar-
ency of the glass, the luminosity
of the bulb, and the bulb life will
be adversely affected. Thor-
6
oughly clean off any dirt and fin-
gerprints on the headlight bulb
using a cloth moistened with al-
cohol or thinner.
● Headlight lens
Do not affix any type of tinted
film or stickers to the headlight
lens.
Do not use a headlight bulb of a
wattage higher than specified.
EAUM2182
ECA10650
1. Do not touch the glass part of the bulb.
To replace a high beam headlight
bulb
1. Remove cowling A. (See page
6-7.)
2. Remove the headlight bulb cover.
1
ZAUM0674
1. Headlight bulb cover
3. Unhook the headlight bulb holder
ZAUM0675
1. Headlight bulb holder
4. Place a new headlight bulb into po-
5. Install the headlight bulb cover.
6. Install the cowling.
7. Have a Yamaha dealer adjust the
To replace a low beam headlight
bulb
1. Remove cowling A. (See page
2. Remove the headlight bulb cover.
6-26
by turning it counterclockwise, and
then remove the burnt out bulb.
sition, and then secure it with the
bulb holder by turning it clockwise.
headlight beam if necessary.
6-7.)
1