Indicator Lights And Warning Lights - Yamaha Xenter HW151 Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS
To unlock the steering
1
2
1
3
1. Turn.
4 2. Release.
Push the key in, and then turn it to
5
"OFF" while still pushing it.
6
7
8
9
Indicator lights and warning
lights
2
1. Turn signal indicator lights "4" and "6"
2. Coolant temperature warning light "
3. High beam indicator light "&"
4. Engine trouble warning light "
Turn signal indicator lights "4"
and "6"
The corresponding indicator light
fl ashes when the turn signal switch is
pushed to the left or right.
High beam indicator light "&"
This indicator light comes on when the
high beam of the headlight is switched
on.
EAU49391
1 2 3 4 1
"
"
EAU11030
EAU11080
3-2
Coolant temperature warning light
" "
This warning light comes on if the
engine overheats. If this occurs, stop
the engine immediately and allow the
engine to cool.
The electrical circuit of the warning
light can be checked by turning the
key to "ON". The warning light should
come on for a few seconds, and then
go off.
If the warning light does not come
on initially when the key is turned to
"ON", or if the warning light remains
on, have a Yamaha dealer check the
electrical circuit.
NOTICE
Do not continue to operate the en-
gine if it is overheating.
TIP
●
For radiator-fan-equipped vehi-
cles, the radiator fan(s) automati-
cally switch on or off according
EAU1044E
EAU11446
ECA10021